Ducati Monster Forum

powered by:

December 01, 2020, 10:12:13 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please read me
 
  Home   Forum   Help Search Login Register  




Pages: [1]   Go Down
  Print  
Author Topic: Heated gear  (Read 259 times)
d3vi@nt
Hero Member
*****
Offline Offline

Posts: 868


« on: November 22, 2020, 10:10:32 AM »

It's been cold and dry here this winter in CO so far, which has got me thinking about heated gear.I know close to nothing on this topic, so was hoping to get some general thoughts.

My MTS has a Gerbing's controller mounted on the side below the seat. It's plugged into the powerlet socket nearby. It has no other marking to identify it. I'm guessing it's 5-7 years old. It has two knobs, one black and one gray and two cables coming off it with what look like RCA-type female plugs. No digital readout or anything fancy.

I'm assuming (guessing) one controller is for jacket and the other for jacket to glove connection? Are these plugs and controllers universal, or proprietary --meaning do I have to get Gerbing gear?

Frequently snow and ice end the riding season here (for me anyway), so I probably won't use it frequently, but you never know. Being an older controller would it be advisable to replace with a current unit before investing in heated gear, or should this unit work just as well with new gear?

TIA
Logged

'13 MTS GT
'99 ST2
'07 M695 - Sold
stopintime
Hero Member
*****
Offline Offline

Posts: 8346


S2R 800 '07


« Reply #1 on: November 22, 2020, 12:18:56 PM »

The controller is most likely the same, but Gerbing will clearify that.

Strangely, each manufacturer seems to be able to find their own plugs - making it difficult to mix and match. Gerbing is expensive, so it might be better to get a complete system, controller included, from another manufacturer.

The 'snow' people have heated helmets, visors, neck gators.... For us, wearing heated gloves is often 'enough'. Maybe a vest to heat our core - which helps other limbs feel ok.
Logged

205,000 km/thirteen years - loving it
d3vi@nt
Hero Member
*****
Offline Offline

Posts: 868


« Reply #2 on: November 22, 2020, 04:25:40 PM »

Thanks for the reply.  I've been looking at the jacket liner (~$250) and gloves. The gloves are priced about the same as any other decent pair. I do have heated grips and handguards that deflect some air, but I still find my fingers get cold after more than an hour or so around 50F.

My current jacket is 3-season, but with the quilted liner added, it's quite bulky and pretty restrictive. Feet seem to do ok and I figure I'd just throw on some capilene or similar for legs. The other weak link is chin and mouth where the cold air hits. I have a balaclava, but it's pretty slippery and allows my helmet to move probably more than it should if I were to hit the ground. Not sure on that one.

I know with the Gerbing gloves, they plug into the jacket, which then plugs into the controller. How does it work if you just have gloves? With my current setup, it seems I'd have to run an extension up both sleeves and out the side or back of the jacket to run to the controller.

Today would've been a beautiful day to ride, but at 42F I knew it would get painful quickly!
Logged

'13 MTS GT
'99 ST2
'07 M695 - Sold
stopintime
Hero Member
*****
Offline Offline

Posts: 8346


S2R 800 '07


« Reply #3 on: November 23, 2020, 12:17:11 AM »

They sell Y-splitters. From one plug to two garments (usually gloves). I don't know if the splitters go through the jacket or outside. Maybe either one....

I'm sure there is a chin curtain out there for you. Maybe not for your helmet brand, but if the 'system' is similar it can work.

If a balaclava makes the helmet slip too much, the helmet is either wrong shape or wrong size?
Logged

205,000 km/thirteen years - loving it
d3vi@nt
Hero Member
*****
Offline Offline

Posts: 868


« Reply #4 on: November 25, 2020, 01:52:56 PM »

Good call on the chin curtain. waytogo Arai sells one for my Vector-2, so I just ordered one up. That should be a big help.

I started looking at the Warm & Safe (www.warmnsafe.com) gear. Cost is pretty close. Apparently they used to supply the controllers for Gerbing, so I believe their gear will plug into my Gerbing controller and work ok. I contacted them to confirm.

Sales on either brand seem hard to come by, though...



Logged

'13 MTS GT
'99 ST2
'07 M695 - Sold
d3vi@nt
Hero Member
*****
Offline Offline

Posts: 868


« Reply #5 on: November 28, 2020, 07:06:46 PM »

If anyone's interested... I contacted Warm & Safe. The owner (Mike) confirmed their gear will work with the Gerbing's controller.

I ordered up a pair of gloves and decided to go with a heated shirt, since I already have a zip-in liner for my jacket. Thought it made sense and cost a bit less than a liner.  We'll see how it goes.
Logged

'13 MTS GT
'99 ST2
'07 M695 - Sold
Pages: [1]   Go Up
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
SimplePortal 2.1.1