FBF Half Price Piston sale

[koko64]

I'll find the link

https://www.ferracci.com/collections/pistons

[greenohawk69]

Thanks for sharing.

[greenmonster]

Who makes them, Wiseco?

[koko64]

Dunno Gert. Maybe Wiseco, JE..

[ducpainter]

I think they're J&E.

[greenmonster]

Looks like JE but they don`t list any 1000/1100:
http://www.jepistons.com/Catalogs/Powersports/Street-Cycle/Ducati.aspx
I haven`t seen that ring set on the 2 sets JE 904 pistons I`ve used.

And if FbF old price for 904 was 900 bux for JE`s, that was ridiculous....

[koko64]

Awhile back I bought some 92mm J&E's from Powerbarn at a very reasonable price. They had 94's too.
JE 904/944 pistons currently for $285 at Powerbarn.

[greenmonster]

About the same I paid from Chris CC.

[koko64]

So it's a good price then. Those were the days when Chris had everything. He's keeping many older bikes on the road with his Exactfit parts.

[greenmonster]

Mailed FbF, answer:
My design, made in US by company that makes for F1, Stock Car; dragster and motorcycles for 70 years, forged pistons.

To me, they llk like JE pistons w Pistal rings design.
Anyone has any experience of FbF pistons?

[koko64]

Fitted hi comp FBF pistons to an M750 once. The valve pocket edges protruded and were very sharp so they were smoothed off. The two sets of 92mm J&E hi comps I've fitted were not like that iirc.

[caperix]

I went ahead and ordered a set for a 750 conversion on a 620.  The packaging indicates they are made by wiseco but must be a custom order for fbf because wiseco does not list any Ducati part numbers.

[koko64]

Thanks for sharing. Good luck with the build. I have a buddy planning to do the same so I might ask for tips.

[Nibor]

I went ahead and ordered a set for a 750 conversion on a 620.  The packaging indicates they are made by wiseco but must be a custom order for fbf because wiseco does not list any Ducati part numbers.

from what I remember of my build, this was the case. Made by Wiseco, for FbF.