Monster project number 3

[Pinion]

Here we go again, enough parts to do 2 more monsters.
I will start with inventory
What I have
03 1000s frame
pair of paul smart wheels
01 ss900ie motor complete
various exhaust set ups
IE tank
forks
wire harness
forks and brake bits

What i need and need to know what years will work, rear swing arm 25mm axle, shock assembly linkage and all

I have a bead on a 04 1000ie swing arm and a 620 shock assembly with linkage set up. Not sure if the 2 go together
need a seat, or maybe I will just make one. for the most part, just need to suss out the rear end
more to come soon
 

[Speeddog]

You can have either an aluminum or steel swingarm.

The axle slider blocks, outer plates, and chain sliders are different between the two, as are fenders, and some of the hardware.

'01S4, '02-'07ish non-S*R Monster swingarms are your choices.

Not sure about caliper bracket/caliper options that will work with those wheels.

[Pinion]

You can have either an aluminum or steel swingarm.

The axle slider blocks, outer plates, and chain sliders are different between the two, as are fenders, and some of the hardware.

'01S4, '02-'07ish non-S*R Monster swingarms are your choices.

Not sure about caliper bracket/caliper options that will work with those wheels.

thanks, are the shock and linkages all compatable by chance

[Speeddog]

All of the OEM shocks in that time frame are the same except for S4 and S4R.

AFAIK, all those would have the same rocker.

AFAIK, all shocks will work with the DSS swingarms, S4R will need some clearance checking/work at the lower left subframe tube.

[Pinion]

All of the OEM shocks in that time frame are the same except for S4 and S4R.

AFAIK, all those would have the same rocker.

AFAIK, all shocks will work with the DSS swingarms, S4R will need some clearance checking/work at the lower left subframe tube.

thanks, much apreciated.