Main Menu

throttle cable routing

Started by scaudill, November 21, 2014, 04:05:25 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

scaudill

November 21, 2014, 04:05:25 AM
I have a new to me 01' 750 Monster.  The throttle cables are routed thru the hole located in the ignition switch bracket.  I bought a service manual but it only shows the cable routing at the handlebars.  Anyone have a picture or knowledge of correct routing.
One other thing, how and where should the starter solenoid be located. 
Thanks,
Sterling

Willthedub

#1
November 21, 2014, 11:41:34 AM
Follow the cable from the starter motor and It should be connected to the star solenoid

ducpainter

#2
November 21, 2014, 11:52:16 AM
Starter solenoid is mounted in a rubber holder under the r/h side of the battery box.
"Once you accept that a child on the autistic spectrum experiences the world in
 a completely different way than you, you will be open to understand how that
 perspective
    is even more amazing than yours."
    To realize the value of nine  months:
    Ask a mother who gave birth to a stillborn.
"Don't piss off old people The older we get, the less 'Life in Prison' is a deterrent."


Speeddog

#3
November 21, 2014, 12:31:44 PM
Cables go under the lateral brace at the forward lower part of the frame.

Then up through the frame on the right side of the steering head.
- - - - - Valley Desmo Service - - - - -
Reseda, CA
(951) 640-8908

~~~ "We've rearranged the deck chairs, refilled the champagne glasses, and the band sounds great. This is fine." - Alberto Puig ~~~

scaudill

#4
November 21, 2014, 12:44:48 PM
Thanks, 
Sure I'll be back with more questions soon.
Thanks again,  Sterling
Print
Go Up Pages1
User actions